Flexible hose catalog

For professionals only

Gas hose EXAGAS® - NBN EN 14800 - DN12 MxF 1/2" - 435015
Stainless steel flexible hose EXAGAS for gaseous fuels: natural gas, LPG
Standard EN 14800 - Type Rht NBN EN 1775 - Comply for Belgian standard NBN D51-003
With Yellow protective sheath
Flexible hose for drinking water Saniflex®-AL ACS DN25 with stainless steel couplings AISI316L - 404025IN
Flexible hose Saniflex-AL for the connection of water meters, water softeners and pumps.
EPDM flexible hose with stainless steel braiding - DN13 - M x F 90° - 418013C
Plumbing & heater hose, all lengths on request
Gas hose INGAS® INOX - NBN EN 14800 - DN12 MxF 1/2" - 425015
Stainless steel flexible hose INGAS for gaseous fuels: natural gas, LPG
Standard EN 14800 - Comply for Belgian standard NBN D51-003
Type Rht NBN EN 1775 - With grey protective cover
Gas hose Netherlands - Gastec QA - Standard EN 14800 - DN12 - 2 x Female M24 with NBR gasket - 445015
Reinforced stainless steel gas hose for gaseous fuels, such as natural gas, LPG
Standard EN 14800 - Compliant for the Netherlands - Gastec QA certificate
Equipped on each side with an M24 anti-twist swivel Female coupling with gasket.
For connecting fixed or mobile gas appliances such as stove tables, ovens and gas stoves.
Flexible hot air duct hose AEROCLIMA® HV - 546HV
Flexible duct for hot air
Temp.: -20°C à +100°C
Diameter: Ø 150 à 900 mm
Gas hose INGAS® INOX DN20 MxF 3/4" - AGB/BGV 91/01 - 425020
Natural gas stainless steel hose with transition sleeve (female) ISO 7
Compliant with the technical specification of Belgian ARGB 91/01
Resistant to high temperature (type Rht) - Certificate KBGV C-18-3792-A
According to the norm NBN D51-003 (pressure <200mbar - MOP inside buildings: 100 mbar)
Lock-nut brass - Metrical thread - 100521
According to DIN 89280
Rubber expansion bellow with loose flanges - 413FSFB
Rubber expansion joint for axial, lateral and angular movements, with loose flanges
Choice between different elastomers: EPDM, NEOPRENE, NITRILE, HYPALON, VITON
From DN25 (1'') to DN300 (12'')
Length: 130mm
Suction and ventilation hose in conductive PE fabric - AEROCLIMA® CLIP PE-EL C70 - 542010070
Electrically conductive PE film hose Ro ≤ 10^6 Ω for air intake and transport.
Made of polyethylene (PE) fibre with a PE coating on both sides.
Set with a galvanized steel spiral band.
Very flexible, lightweight and highly compressible (1:6).
Surface resistance Ro ≤ 10^4 Ω
Temperatures from -20 °C to +70 °C.
Suitable for the extraction of chemical vapours.
Reinforced PVC flexible hose INPLAST-AL - Foodgrade quality - 208
Food grade flexible hose made of transparent PVC reinforced with a textile braid.
Operating pressure at 20°C = 15 bar < 35 mm int. / 12 bar < 32 mm int. / 10 bar < 40 mm int. / 8 bar < 50 mm int.
Tolerances from +/- 0.2 mm to +/- 0.5 mm depending on the diameter.
50 meter roll